article Open access

F071001 Advanced After Treatment Technologies for Tighter Regulations

  • The Proceedings of Mechanical Engineering Congress Japan
  • Japan Society Mechanical Engineers
Research footprint

At a glance

Citations
0
References
0
Comments
0
Paper overview

Öz

Regulations are continuously tightening. LEV III starts in MY 2015 and Tier3 regulation starts in MY2017. Both regulations are nominally a 70-80% tightening of NMOG (non-methane organic gases) and NOx from LEV n or Tier2 levels. These are roughly 40% tighter than Euro 6. More than 75% of emissions in FTP-75 regulatory test are released in the first a few seconds after cold-start. The heat capacity of catalyst the substrate is a factor effecting catalytic light-off. Historically, substrates with thinner walls and lower heat capacity have been developed to improve cold-start performance. A new material and process technology has been developed to achieve faster light-off performance with higher porosity compared to conventional substrates. The new material enables thin walls (2-3mil) in a 55% porosity substrate to reduce heat capacity by 30-38% while maintaining adequate strength. Faster light-off performance using new substrate was demonstrated in laboratory bench and actual vehicle testing.

Record transparency

Publication details

DOI
10.1299/jsmemecj.2015._f071001-1
OpenAlex
W2663006343
Document type
article
Language
EN
Source
The Proceedings of Mechanical Engineering Congress Japan
Last metadata update
Community

Comments

Oturum Açın to join the discussion.

  1. No comments yet. Start the discussion.